For Safety – The Airchek 3000

For Safety – The Airchek 3000

Our newest ATEX-approved pump, which has a flow range of 5-3250 ml/min, the AirChek 3000 has the highest safety rating of any pump we offer, with approval for use in flammable dust zones and in mines. It is suitable for particulate or vapour sampling, and has a rubberised case to protect against knocks, making it the most robust pump in our range.



  • Certified for use in the majority of potentially explosive environments
  • IP64 rating
  • Patented internal flow sensor
  • Rechargeable battery pack with fast charger (3 hour recharge) to reduce downtime
  • Wide flow range, suitable for dust sampling and vapor sampling
  • Simple to use with a large LCD
  • LED indicates pump running
  • Rubberised case to protect against knocks
  • Automatic calibration using CalChek
  • Programmable using the integral keypad or with a PC for maximum versatility

*The AirChek 3000 is also available in basic pump, dust sampling, vapour/gas sampling, and combined dust/vapour sampling kits.



Dimensions 13.3 x 9.0 x 5.9 cm (5.2 x 3.5 x 2.3″)
Weight 580 g (20.5 oz)
Operating Temperature 0 to 40°C (32 to 104°F)
  • Continuously displays battery status

  • Displays sampling parameters (flow rate, air volume, run time, battery status, temperature and atmospheric pressure)

Case Dustproof and water-resistant (IP64), fitted with integral belt clip
Power Supply
  • Rechargeable NIMH battery pack provides 12+ hours minimum runtime at 2000 ml/min and up to 30 inches water back pressure

  • Fast charging time of 3 hours using the single charger

  • Low battery indication on LCD

Flow System
  • Flow range: 1000 to 3250 ml/min, 5-500 ml/min with low flow adaptor

  • Constant flow compensation provides constant flow within ±5% for accurate air volume

  • Built-in replaceable particulate trap to prevent contamination of the sample

  • Flow fault icon appears if the flow is restricted or blocked

  • Auto-restart is attempted after flow fault

Programming Programmable Using the optional DataTrac PC software, the pump run time data and history can be downloaded, as well as sampling sequences set up including delayed start, timed stop and intermittent sampling, all at different flow rates
Tubing Required
  • 1/4″ ID

Get A Quote

"*" indicates required fields

This field is for validation purposes and should be left unchanged.